Lian Li LANCOOL II with 3x ARGB fans – white | Gaming Case

LANCOOL II MESH RGB features a mesh front panel and mesh bottom left shroud
honeycomb vent design and built-in RGB fans
ensuring bountiful airflow delivered to your high-performance components
Premium look, Unprecedented modularity

₨ 32,499

Description

WHERE TO BUY

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

Premium look
Unprecedented modularity
Hinged flip panels all around
Optimized cooling support
Cable management with ease
Optimized storage configuration

EXQUISITE STEEL CRAFTSMANSHIP

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.

MORE ADVANCED COOLING SUPPORT

Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance ARGB cooling fans.

BUILT-IN BOUNTIFUL ARGB FANS

3 x 120mm ARGB intake fans pre-installed at the front produce ample airflow while still offering bountiful RGB to liven up your PC build.

The fan power plug connecting to the 3 included fans is compatible with these two fan headers on the motherboard:
(splitter cable is not included)

ULTIMATE COOLING SUPPORT

Add the BORA DIGITAL ARGB FANs to have more vibrant RGB and increased cooling efficiency for your LANCOOL II MESH build!

To further control the added BORA DIGITAL FANs through the C and M buttons, connect the header to one of the headers on the cable connecting to 3 included fans.

SHOP NOW

EXPERIENCE ARGB CONTROL ON A WHOLE NEW LEVEL

Lighting effects of the 3 included ARGB fans can be fully controlled through the C button and M button located on the top front. Switching between 8 lighting modes has never been this easy.

Note!
By plugging the fan hub’s ARGB header into the motherboard’s 3-PIN 5V addressable RGB headers, you’ll be able to synchronise the lighting effects with the motherboard software by switching the M button to the 8th mode.

Note!
If your motherboard doesn’t have any 5V addressable RGB headers, make sure to connect the SATA cable connecting the hub to the power supply and use the C and M buttons to control the lighting effects.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.

ATTENTION!
Do not install a 140/280MM radiator in the inner side of the bracket otherwise irrepairable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

TOOLLESS SLIDING DRIVE CAGE
Slide the hard drive cage along its bottom track to the position that best fits your interior configuration.

DRIVE INSTALLATION GUIDE

SUPPORT UP TO 9 DRIVES

Modular drive cage: 3 x 3.5” HDDs/2.5” SSDs

Side-mounted SSD bays behind motherboard tray:
2 x 2.5” SSDs
Side-mounted SSD bays at the bottom right flip shroud:
2 x 2.5” SSDs

REMOVABLE TWO-WAY CABLE MANAGEMENT BAR

Flippable, flexible, multi-functional

FLIP PANELS AND SHROUDs ALL AROUND

The tempered glass side panels offer an unobstructed view to the interior configuration while the bottom shroud panels provide quick access to PSU/drive installation.

CABLE MANAGEMENT WITH EASE

The cover plates save users’ neck and fingers by concealing nearly all the wayward cables.

AVAILABLE IN BLACK OR WHITE / SNOW EDITION

LANCOOL II MESH RGB EDITION provides users with two color choices. With the attractive built-in RGB touch, building your own one-of-a-kind dream PC has never been this easy.

MESH PANEL KIT

Mesh front panel is available for those LANCOOL II users craving to upgrade their system by swapping to a mesh front panel.

SHOP NOW ON NEWEGG

OPTIONAL KIT

LANCOOLII-1X Vertical GPU Kit

LANCOOLII-2X
Side Diffused LEDs Strip

LANCOOLII-3X Hot-swappable Back Plate

LANCOOLII-4X
3.1 Type C Cable

(Or installed)

GB-001X Anti-sag GPU Bracket

Note:
In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.

1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)

4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.

Power Your Play:
shop our pre-build
packages

Starting From PKR : 44,999